Last updated
Last updated
The Smart Building Kit contains:
1x IAQ Sensor AM103
1x Smart IoT Controller UC300
1x Smart Button WS101
1x Magnetic Contact Switch WS301
1x Spot Leak Detection Sensor EM300-SLD
1x LoRaWAN Gateway UG65
Application examples:
Monitor and visualize when to air a room (AM103)
Prevent the buildup of mold in infrequently used rooms (AM103)
Circumvent damage from prolonged water exposure (EM300-SLD)
Product Features:
Screen and traffic light indicator (AM103)
Industrial-grade enclosure with IP67 (EM300-SLD only)
Multiple Press Actions (WS101 only)
You can buy the Milesight Smart Building Kit in the of Actility.
In this tutorial, you will learn how to connect the Milesight Smart Building Kit to akenza. You will achieve the following:
Integrating your Actility account to your akenza environment
Creating Data Flows and Milesight devices on akenza
Creating your individual dashboard for data visualization
After successful integration, the Actility-account-integration gets displayed on the Connectivity Integration Overview.
Data Flows consist of a device connector, a device type, and an output connector and define how device data are processed on akenza.
Once all specific Data Flows are created for your devices, continue with the creation of your devices.
To add a device to your environment, select +Create Device in the tab of Assets and fill in the required device parameters. By assigning the appropriate Data Flow, your device will be automatically registered and connected to your Actility account.
Upon a join request, the device will turn online. Incoming data are displayed in Message Logs and also on the Data Overview of your device detail page.
Currently, all devices are created with a generic LoRa device profile. Do not do any changes on the Actility account.
In order to visualize your data with the dashboard composer, switch to the dashboard composer by selecting Dashboard in the side navigation. You will get redirected to the dashboard overview. Select Create a Dashboard and start adding the Widgets of your choice.
By adding the component Chart, the Source Tab allows to select the device of your choice and its data points. Customize the dashboard to your liking.
Optional
Support
Reach out to us if you need any further support:
Milesight
To get started with akenza, follow in order to set up your environment.
In order to proceed with the Actility integration on akenza, make sure to create a and pre-commission the Milesight gateway to it as described . Follow this if you need to install Actility's firmware on the gateway.
The integration of Actility will be used to connect, synchronize and manage Assets on akenza. Start with the integration of your Actility account by adding your credentials on the Actility tab within Integrations. More details about Integrations (for ThingPark Enterprise only) can be found .
If you use the community instance of ThingPark, the required Profile ID is community-api. To find the Profile ID please check out the Actility API documentation of your account. See the example .
As a next step, go to Data Flows in your Workspace and choose as device connector LoRa and consequently, the Actility integration you have done in step 2. For data parsing continue with the selection in Device Types of your specific Milesight device. As an output connector, select the akenza database. This will store the data on akenza and allows further use on the dashboard composer. More about Data Flows can be checked .
Try out other akenza features such as the rule engine. The rule engine allows you to apply a business logic to your infrastructure. E.g. inform your teammates about certain conditions by using MS-Teams as notification service. Check out more .
In this tutorial, you will learn how to integrate devices from the Smart Building Kit of Milesight with Actility on akenza. This kit is offered on the ThingPark marketplace of Actility.